PATIENT TRANSPORT TROLLEYS PRODUCTS NEWS

TROLLEYS FOR PATIENT TRANSPORT WP-02.0, WP-02.1, WP-02.3, WP-02.4

WP-02.0

WP-02.1	WP-02.3
WP-02.4

The trolleys enable transporting adult patients in lying position between hospital and clinic wards. They are made of powder varnished steel sections. The back rest segment is filled with a laminated board, which is translucent for X-rays. It is also possible to monitor the patient's chest with a C arm. The pallet's height regulation is adjusted by a hydraulic pump. The pallet's longitudinal tilts and the back rest segment regulation are adjusted by gas springs with a blockade. In a trolley with a three segment pallet (WP-02.1), the shank segment is realized by gas springs with a blockade. In the WP-02.4 trolley there is an lifting frame built in, which enables mounting a drip bottle holder behind the patient's head. Detachable mattresses are standard accessory for these trolleys. One of the trolley's chassis can be used as a a receptacle for small items. These trolleys are equipped with castors with a central blockade, and with one directional wheel. Accessories for WP-02: Side rails: Chromium plated PB-10.2 (WP-02.0, WP-02.1, WP-02.4), Chromium plated with polyurethane elements PB-15.4 (WP-02.3), Lacquered PB-15.5 (WP-02.3), Chromium plated PB-15.6 (WP-02.3) and Drip bottle holder (WP-02.0, WP-02.1, WP-02.3, WP-02.4), Oxygen bottle basket (WP-02.0, WP-02.1, WP-02.3, WP-02.4), straps for patient's immobilization (WP-02.0, WP-02.1, WP-02.3, WP-02.4).

TECHNICAL DATA WP-02.0, WP-02.1, WP-02.4:

Total length (WP-02.0, WP-02.1): 2000 mm
Total length WP-02.4 with bumpers in corners: 2200 mm
Total width WP-02.0, WP-02.1 (without side rails): 680 mm
Total width WP-02.4 with bumpers in corners
(without side rails): 675 mm
Pallet height adjustment bracket: 600 to 900 mm
Back rest segment inclination angle: 70°
Leg rest segment inclination angle (WP-02.1): 35°
Trendelenburg position (WP-02.0, WP-02.1): 23°
Trendelenburg position WP-02.4 with bumpers in corners: 17°
Reverse Trendelenburg position: 12°
Castor diameter: 200 mm
TECHNICAL DATA WP-02.3:
Total length x total width (without side rails): 2085 x 775 mm
Pallet height adjustment bracket: 645 to 885 mm
Back rest segment inclination angle bracket: 70°
Trendelenburg position: 15°
Reverse Trendelenburg position: 12°
Castor diameter: 200 mm

Castors diameter: 200 mm