COMMODE
ML- 05.1

Commode is made of laminated chipboard and MDF board. Commode's corners are made of aluminum tubes. It is equipped with four drawers and two doors. Doors of the commode are equipped with hinges. Hinges are equipped with a self-locking mechanism, which enables door's opening up to 110°.

TECHNICAL DATA ML-05.1:
Width x depth x height: 920 x 540 x 1020 mm

BEDSIDE LOCKER
SP-05.1

Bedside locker SP-05.1 support construction is made of aluminum tubes. It is equipped with a drawer and door fixed to the hinges. Hinges are equipped with a self-locking mechanism, which can be opened up to 110°.

TECHNICAL DATA SP-05.1:
Width x depth x height: 570 x 500 x 880 mm

WARDROBE
ML-04.1

Wardrobe is made of chipboard laminated board and MDF board. Wardorob's corners are made of aluminum tubes. The inside of the wardrobe is divided into a compartment designed for cloths hanging and a part equipped with shelves. Wardrobe's doors are fixed to the hinges equipped with a self-locking mechanism, which can be opened up to 110°.

TECHNICAL DATA ML-04.1:
Width x depth x height: 900 x 540 x 1820 mm

REHABILITATION BED
LR-06

The LR-06 rehabilitation bed is designed for rehabilitation, cure and convalescent of the patients in hospitals and sanatoriums. Thanks to the wooden covers the bed associates with the comfort and domestic conditions. The bed construction is made of steel sections covered with powder varnish. Bed construction enables the patient resuscitation. Smooth height adjustment, change of the back rest segment and thigh rest segment inclination angles is performed by electric motors supervised by wire control. It is possible to lock the determined movement on the control panel. Built-in battery enables the bed's movement control in case of electric power cut off. The manually activated Trendelenburg and reverse Trendelenburg tilts are supported by gas springs with interlocking. Bed can be easily moved and is equipped with central blockade with directional wheel. Bed fulfills the requirement included in PN-EN-60601-2-38 standard.

TECHNICAL DATA LR-06:
Length x width: 2120 x 1070 mm
Height bed frame adjustment: 450 to 730 mm
Trendelenburg position: 12°
Reverse Trendelenburg position: 5°
Back rest segment inclination angle: 70°
Thigh rest segment inclination angle: 30°
Castors diameter: 125 mm