PATIENT WARDS AND HOSPITAL ROOMS PRODUCTS NEWS

MULTIFUNCTIONAL REHABILITATION BED LE-08

The bed is designed for adult patients lying in hospitals during diagnosis, monitoring and cure and for rehabilitation and resuscitation. The bed frame and chassis is made of varnished steel profiles covered with epoxy varnish. The Bed pallet segments and the head/foot boards are filled with X-ray translucent laminated board. Bed is equipped in protective bumpers in the bed corners. The central or individual wheels blockade could be installed. Bed construction enables setting the pallet in chair position. Simultaneous back rest and thigh rest segments adjustment as well as longitudinal tilts are performed by means of electric actuators controlled by a wire controller. There is a possibility of blocking leg segment in horizontal position by means of two hand blockades. Blocking panel enables control and blocking of certain bed functions. The bed is equipped in built in battery, which in case of power network failure allows to perform a few cycles necessary to ensure patient safety (levelling of bed segments) Deflectable side rails are assembled to the middle segment frame section.

TECHNICAL DATA LE-08:

Total bed length x width (without side rails): 2050 x 900 mm
Pallet height: 540 mm
Back rest inclination: 74°
Shank rest inclination: 38°
Trendelenburg position: 18°
Reverse Trendelenburg position: 5°
Castors diameter: 125 mm