 INTENSIVE CARE BED LE-07
The bed is designed for adult patients lying in hospitals
during diagnosis, monitoring and cure and for rehabilitation and
resuscitation.
Electric adjustments: bed height adjustment, back rest section adjustment,
thigh rest section adjustment, auto contour function, Trendelenburg
and reverse Trendelenburg tilts. Mechanical functions: manual adjustment
of the shank section (supported by gas spring with an interlocking),
fast back rest section release mechanism (CPR). The bed is also equipped
with auto regression function and cardiologic chair function. Steering
and drives: electric drives controlled with a use of central control
panel, wire controller or from the control panels assembled in the
side rails. There is also a possibility to control of all electric
functions during the bed movement. The bed is equipped with battery.
Construction: The bed frame made of steel profiles covered by a epoxy
varnish or made of stainless steel. The filling of back rest section
made of X-translucent material, filling of the remaining segments
made of ABS covers, back rest also equipped with X-ray tunnel. The
central blockade of the bed is available from two sides of the bed.
Bed is equipped in wheel that facilitates moving ahead.
TECHNICAL
DATA LE-07:
Total bed length x width (without side rails): 2180
x 965 mm
Pallet height adjustment: 455 to 830 mm
Back/thigh rest segment inclination: 70°/35°
Trendelenburg and reverse Trendelenburg position: 15°
Castors diameter: 150 mm
|
|
%20nowa/images.gif){kind=small}