INTENSIVE CARE BED LE-03

LE-03 with boards and side rails
made of polyurethane and laminated board
The bed is designed for adult patients lying in hospitals during
diagnosing, monitoring and cure. The bed is made of stainless steel
or steel sections coated with powder varnish. Adjustment of pallet
height, longitudinal tilts (Trendelenburg and reverse Trendelenburg),
back rest, thigh segment are carried out by means of electric actuators.
The bed is equipped in CPR function in back rest and thigh rest,
auto-regress function and auto-contour function. Shank rest is
adjustable via gas springs. Back rest is X-ray translucent. Cardiologic
chair function can be also obtained. Controlling the electric drive
system is possible by means of the central panel and wire controller
or in the base range by control panels in the side rails. A scale
installed in LE-03 bed enables controlling a patient weight (a
trend in a supervised period) and facilitates determining a medicine
dose, in case when it depends on a patient weight. Additional equipment:
standard mattress (polyurethane foam filler and washable, steam
permeable cover), anti decubitus mattress, double extension apparatus,
drip bottle holder with 4 hooks, drip bottle holder with 2 hooks
and 2 baskets, hand holder, controller holder, shelf (e.g. for
diagnostic devices), shelf mounted on the drip bottle holder.
OFFERED
VERSIONS OF THE SIDE RAILS AND BOARDS FOR LE-03:
Bed LE-03 with
boards and side rails made of ABS plastic
Bed LE-03 with boards and side rails made of polyurethane
and laminated board
Bed LE-03 with boards and side rails made of polyurethane and
plexi
Bed LE-03 with side rails made of ABS foldable along the pallet
TECHNICAL
DATA LE-03:
Total bed length x width (without side rails): 2280
x 970 mm
Height adjustment: 510 to 880 mm
Trendelenburg position: 22°
Reverse Trendelenburg position: 22°
Back rest inclination: 75°
Tight segment inclination: 35°
Castors diameter: 150 mm

LE-03 with boards and side reails made of polyurethane and plexi
|